How can i configure the fuel consumption for my vehicles?

Our pioneer GPS Tracking Software uses a complex algorithm, which is capable to provide 90% accuracy about the fuel consumption of your vehicles! You can make use of this feature, by simply adding the fuel consumption rate of your vehicles.

First of all, you have to open the settings of your vehicles, by pressing the “Settings” tab and then click the edit icon, exactly as the image below shows :


2) Once the new window appear, navigate at the”Fuel Consumption” tab, which is highlighted with red square on the below image:


In this new window, you can edit the fuel consumption settings of your vehicle!
Source: Here you can choose the source of the fuel consumption. We recommend using Rates.
Measurement: You can choose between litres and MPG. Default setting is l/100km.
Cost per liter: Here you add hte cost per fuel liter. On our example the liter costs 1,5euro.
Rates Summer rate (kilometers per liter): Here you type the consuption of your vehicle. In our example the vehicle consumes 7litre/100 km.
Rates Winter rate (kilometers per liter): Here you type the consuption of your vehicle in the winter months. In our example the vehicle consumes 7litre/100 km.
Winter from: Finally on the two last options you define when you want to count the winter rate (from which month of the year.)

How can i connect the ignition detection sensor?

In order to connect the Ignition detection on our GPS Tracking Software and learn when the engine of your vehicle is ON or OFF, you will have to follow the below instructions:

1) You will need to connect the Ignition cable of your GPS Tracker device (usually the yellow cable, DI1) at a cable of your car, which has power when the engine is ON (Please refer to the user manual of your device). We suggest to connect it directly to the ignition cable.

2) Once you have connected the proper cable, edit your GPS Tracker device and navigate on the “Sensors” tab.

3) Press the “+” button which is located at the bottom of the window, and the below options will appear.


4) Add a new Sensor by using the below options:

Name: Engine Status (you can write anything you want here)
Type: Ignition (ACC)
Parameter: It depends on how you have connected your cables. However it will be one of the following options:
Type: Logic
If sensor “1” (text): Engine ON
If sensor “0” (text): Engine OFF

Finally press the “Save” button and you have created a new sensor for your GPS Tracker device!

How can i add sensors on my devices?

Adding sensors on your GPS Tracker device will allow you to increase the capabilities and enhance the features your GPS Tracker devices provide you! Our pioneer Tracking Software accepts a variety of sensors, however, in the first place, your GPS Tracker device is responsible for providing us the proper details. Therefore it is crucial to enable all the appropriate I/O (input/output) sources of your GPS Tracker device, in order to provide the software all the required details in order to present the findings from your sensors.

We strongly recommend checking the user manual of your GPS Tracker device, before continuing on.

1) On the GPS Tracker device you want to add sensors, click on the dots icon and then click on the “Edit” button.


2) On the new window that will appear, click on the “Sensors” tab and then click the “+” icon at the bottom left corner, as it appears on the figure below.


3) On the new window that will appear (figure below) you will see the “Sensors Properties” window. From there you can add all the appropriate details about your new sensor.

4) Hint: The sensors parameters depends on your GPS Tracker devices. A quick guide about the sensor parameters can be found here. If you need any further assistance about adding sensors on your account, contact us!

How can i create the maintenance feature?

The service maintenance feature is a very helpful feature that once it is configured, it notifies you when your vehicles need to undertake the service maintenance.

1) First of all, you need to add the current kilometers (or miles) your vehicle has. In order to do so, edit your vehicle settings (Figure 1, below).


2) Navigate to the “Service Tab” and click on the “+” located at the bottom of the window (highlighted with red square).



3) Once you press the “+” button a new window will appear where you can set the service maintenance. From there you can configure the service maintenance feature according to your needs. For example, you can set the next maintenance to occur when the vehicle has made some specific kilometers, or when the engine has worked for some specific hours.

4) Don’t forget if you want to get notified about the service, you will have to create a notification event!

You can view an example on how to create service event, based on days interval here.