Common Sensor parameters
2 min read
Our pioneer GPS Tracking Software, allows you to connect various sensors, so you can have a better tracking experience for your fleet of vehicles! In order to check how you can add sensors to your account, please click here.
Below you can find a list of the most common sensor parameters. Please make sure that you check the user manual of your GPS Tracker device before adding a sensor because instead of these values you might receive io (input-output values: ie. io85, io175, io240, and so on). Through the user manual of your manufacturer, you can understand what these io values mean!
| alaX | ala – Alarm, X refers to alarm number | 0 = no alarm, 1 = alarm |
| acc | ACC status | 0 = off, 1 = on |
| accv | ACC voltage | Value |
| batl | Battery level | Value |
| batp | Battery percentage | Value |
| batv | Battery voltage | Value |
| bats | Battery status | 0 = not charging, 1 = charging |
| diX | di – Digital Input, X refers to input number | 0 = off, 1 = on |
| doX | do – Digital Output, X refers to output number | 0 = off, 1 = on |
| aiX | ai – Analog Input, X refers to input number | Value |
| aoX | ao – Analog Output, X refers to output number | Value |
| canX | can – CAN port data, X refers to CAN port number | Value or String |
| tempX | t – temperature, X refers to temperature meter number | Value |
| fuelX | fuel – Fuel level, X refers to fuel meter number | Value |
| pump | Fuel pump status | 0 = off, 1 = on |
| ibut | iButton for driver ID | String |
| rfid | RFID for driver ID | String |
| odo | Absolute odometer in km | Value |
| odor | Relative odometer in km (between two records) | Value |
| engh | Absolute engine hours | Value |
| enghr | Relative engine hours (between two records) | Value |
| gsmlev | GSM signal level, signal strength | Value |
| gpslev | GPS signal level, number of satellites | Value |
| hdop | HDOP | Value |
| pdop | PDOP | Value |
| vdop | VDOP | Value |
| track | If device is in tracking mode or not | 0 = no, 1 = yes |
| sleep | If device is in sleep mode or not | 0 = no, 1 = yes |
| move | If device is moving or not | 0 = no, 1 = yes |
| accel | Accelerometer status | 0 = no, 1 = yes |
| dlog | Data logging status | 0 = no, 1 = yes |
| balance | SIM card balance | String |
| lac | GSM Location Area Code | String |
| cellid | GSM Cell ID | String |
| mcc | MCC | String |
| mnc | MNC | String |
| can_sysev | CAN system event | String |
| can_vemot | CAN vehicle motion | String |
| can_clus | CAN clutch pedal state | String |
| can_bres | CAN break pedal state | String |
| can_accs | CAN acceleration pedal state | String |
| can_crus | CAN cruise control state | String |
| can_ptos | CAN PTO state | String |
| can_enplcs | CAN engine PLCS | String |
| can_tyreloc | CAN tire location | String |
| can_axlew | CAN axle weight | String |
| can_axloc | CAN axle location | String |
| can_haninf | CAN handling information | String |
| can_dirind | CAN direction indicator | String |
| can_flev | CAN fuel level | String |
| can_fcr | CAN fuel consumption rate | String |
| can_feco | CAN fuel economy | String |
| can_pto | CAN PTO | String |
| can_hrfc | CAN HRFC | String |
| can_dist | CAN distance | String |
| can_amt | CAN ambient air temperature | String |
| can_ect | CAN engine coolant temperature | String |
| can_rpm | CAN RPM | String |
| can_engh | CAN engine hours | String |
| can_srdist | CAN service distance | String |
| tco_dist | TCO distance | String |
| tco_trip | TCO trip | String |
| tco_vespd | TCO vehicle speed | String |
| tco_rpm | TCO RPM | String |
Updated on October 6, 2024
Powered by BetterDocs